Table of Contents
- Product Specification
- Introduction
- How do I pair two headphones with my phone?
- Functions
- Charging
- Storage and Maintenance
- Frequently Asked Questions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dzstorm
User Guide for MD026
True Wireless Stereo Earphones
Table of Product Contents
Product Specification
| Bluetooth Version: | 5.3 |
|---|---|
| Support: | HSP/HFP/A2DP/AVRCP |
| Charging Port: | Type-C |
| Battery capacity: | Earbuds: 50 mAh |
| Battery life： | 5 hours of use per full charge |
actual battery life varies with song type and volume requirements)
Standby time：| Up to 25 hours
Charging time：| 1 hour for earbuds / 1 hour for charging case
Transmission range：| 15 meters (without obstacles)
Introduction
How do I pair two headphones with my phone?
Please make sure both the earbuds and the charging case are fully charged before first use.
Step 1
Take both earbuds out of the charging case and both earbuds will power on andstart pairing automatically
(If the earbuds are not connected to your device for more than 5 minutes,theearbuds will automatically turn off
Press the MFB button for about 3 seconds to manually turn on the earbuds whenprompted “Power on”.)
The indicator light of one earbud will flash red and blue alternately, and theindicator light of the other earbud will slowly flash blue when pairedsuccessfully.Step 2
Enable the Bluetooth pairing mode on your phone device, search and select“MD026” to connect.
(You should hear a voice prompt “connected” when wearing earbuds).If indicator light of earbud is off,it means the phone is connected
Automatic connection
By default, the earbuds will connect the last paired mobile automati-callywhen power on.
- Prompt
- If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps.
- These earbuds can be used not only together, but also individually
If you want to use single earbud
Just take one earbud out of the case and connect it to your phone. or whenusing two earbuds, manually turn off one earbud or put one back in the chargingcase and you’ll be able to use the other one earbud alone.
Functions
- Telephone Communication
| Answer call: | Tap once |
|---|---|
| Hang up: | Press and hold the key for 2s |
| Refuse incoming call: | Press and hold the key for 2s |
- For Music
| Play/pause | Tap twice |
|---|---|
| Previous track | Press and hold “L” for 2s |
| Next track | Press and hold “R” for 2s |
| Activate Siri | Quick tap for three times |
| Turn down volume | Single tap on left earbud |
| Turn up volume | Single tap on right earbud |
Charging
Earbuds Charging
The earbuds will only be charged when you correctly place them in the chargingslots and close the lid.(You can charge the charging case and the earbuds atthe same time, or you can charge the charging case first and then the earbuds.)
The charging case will stop charging automatically and the indicator light onearbuds will go out when fully charged. When the earbuds are charging in thecharging case, the digital display bar of the case will keep blink and turn offafter 60 seconds.Case Charging
There is a Type-C usb charging cable in the package, please use it to chargethe case directly. During charging, the digital display will flash and displaythe battery level in real time. When fully charged, the number shows 100.
Charging Alerts
After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
You can fix this problem by cleaning the magnet connectors on the earbuds andcharging case with an alcohol wipePut the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automatically. The earbuds will connect the last paired mobile automatically.
Storage and Maintenance
If the earbuds have not been used for more than 3 months, we recommend that you charge it.
Please use an charger approved by FCC
FFC : (Federal Communications Commission).Do not dissemble the earbuds.
Children aged 12 and under require adult supervision.
Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.
Frequently Asked Questions
Q : Why don’t these earbuds pair with my phone?
– A : Make sure the earbuds are fully charged and powered on.
Make sure your phone’s Bluetooth is enabled
If there is no problem with the two points stated above, turn off the powered-on earbuds after 5 continuous and quick clicks. Put them back into thecharging case and close the lip, wait for 1 minute, then open the chargingcase and reconnect the earbuds to the phone.
Q : Why does the music cut in or out?
– A : First, keep the earbuds no more than 49 feet away from your phone
(no obstacles).
If the distance is less than 49 feet, follow these steps:
1. Put the earbuds back into the case and close the lid, manually click“forget the MD026” on your phone
2. After 10 seconds, open the charging case and reconnect theseearbuds withyour phone
Q : Why the earbuds still won’t be charged or disconnect from the phoneafter I put them in the case and close the lid?
– A : Make sure the charging case is not in a low battery state.
If the charging case is in a low battery state, the earbuds will neither becharged nor disconnected.
In this case, please use a type-c charging cable to fully charge the case.
Q : Are these earbuds sweat- and water-resistant?
– A : These earbuds are sweatproof and slightly waterproof.
For electronic devices, we do not recommend that you submerge the earbuds inwater.
For more detailed product FAQs, please contact our customer service.
Activation & Warranty
Permanent replacement of damaged, defective, upgraded or missing items (noneed to return the original)
Please activate via email below within 15 days.
“ mchiu527@gmail.com ”
Read User Manual Online (PDF format)
Loading......
