Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (2024)

Hitch receiver sizes can be confusing. You may be wondering: what size tow hitch do I have, and is it big enough to fit what I’m trying to tow?

When it comes to towing, you need the right equipment for the job.

One of the most important pieces of gear is your hitch receiver.

This component attaches your trailer to your vehicle, so it’s important to know the different sizes that tow hitch receivers come in.

We’ll cover all the different hitch receiver sizes, what classes of tow hitch they correspond to, and help you choose the correct receiver size for your vehicle.

Contents show

Hitch Receiver Sizes

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (1)

There are four main sizes of tow hitch receivers available: 1-1/4″, 2″, 2-1/2″, and 3″.

The measurement refers to the width of the opening on the receiver, not the width of the receiver itself.

We’ll go over each of these in-depth in today’s guide.

Why Receiver Size Matters

As we covered, the smaller the receiver opening, the smaller the hitch accessory that will fit in it.

The smaller the hitch accessory or tube is, the less weight it will be able to carry.

This is why it’s so important to never exceed the weight limit of your hitch accessory to avoid damage to your vehicle, hitch receiver, and other equipment.

Receiver Size And Hitch Class

Each receiver size is usually defined to a class or grouping of hitches, ranging from class I to V (1 to 5).

As the hitch classes increase, the more weight and larger items can be towed.

Each vehicle will have a certain maximum hitch class that can be installed on it in order to not exceed it’s towing capacity.

This is why it’s so important to choose the proper hitch class for your vehicle.

Check out this cheat sheet showing the relationship between hitch receiver size, hitch class, and towing weight:

Tow Hitch Receiver Sizes

Hitch Receiver SizeHitch ClassMaximum Gross Trailer Weight (GTW)Maximum Tongue Weight (TW)Vehicle Types
1-1/4"Class I / Class 12,000 lbs200 lbsCars, Crossovers, Some Small SUVs
1-1/4"Class II / Class 23,500 lbs350 lbsCars, Crossovers, Small Vans, Small SUVs
2"Class III / Class 38,000 lbs800 lbsCrossovers, Vans, SUVs, 1/4-Ton and 1/2-Ton Trucks
2"Class IV / Class 412,000 lbs1,200 lbsCrossovers, Vans, SUVs, 1/4-Ton and 1/2-Ton Trucks
2-1/2"Class V / Class 520,000 lbs2,000 lbsHeavy-Duty Trucks
3"Class V / Class 525,000 lbs4,000 lbsCommercial Vehicles (Flatbeds, Dump Trailers, etc.)

Now that we’ve got our key info down, let’s move on to hitch receiver sizes and hitch classes.

1-1/4″ Receiver Size: Class I & Class II Hitches

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (2)

Class I and Class II trailer hitches usually have a 1-1/4″ (1.25″) square opening.

These are usually found on small SUVs, smaller vans, and cars that are towing very lightweight loads or lightweight trailers.

Class I trailer hitch weight ratings generally have maximum gross trailer weight of 1,000-2,000 lbs and a maximum tongue weight of 100-200 lbs.

Class II trailer hitch weight ratings generally have maximum gross trailer weight of 2,000-3,000 lbs and a maximum tongue weight of 200-525 lbs.

2″ Receiver Size: Class III and Class IV Hitches

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (3)

Class III and Class IV hitches usually have a 2″ square opening.

These hitches are usually found on SUVS, crossovers, quarter-ton half-size pickup trucks (like the Colorado, Canyon, Tacoma, and Frontier), half-ton full-size pickup trucks (like the F-150, Titan, Ram & Chevy 1500, and Tundra), and a few full-size four-door cars, such as sedans.

The most common factory-installed hitch receiver sizes are 2″.

The important distinction of a 2″ hitch receiver is that they’re rated for use with weight distribution hitches, meaning that you can get the most towing capacity out of them.

Class III trailer hitch weight ratings typically have maximum gross trailer weight of 3,500-8,000 lbs and a maximum tongue weight of 300-800 lbs.

Class IV trailer hitch weight ratings usually have maximum gross trailer weight of 5,000-12,000 lbs and a maximum tongue weight of 500-1,200 lbs.

It’s important to note that some 2″ size hitch receivers can be classified as Class V hitches if they have increased weight capacity or extra reinforced construction.

2-1/2″ (2.5″) Receiver Size: Class V Hitches

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (4)

Class V hitches can have either a 2-1/2″ (2.5″) or 3″ opening, making them a little different than Class I to Class IV hitches.

You’ll only see 2-1/2″ Class V hitches on extremely capable heavy-duty trucks.

2-1/2″ (2.5″) Class V hitch weight ratings have maximum gross trailer weight of 10,000-20,000 lbs and a maximum tongue weight of 1,000-2,000 lbs.

3″ Receiver Size: Class V Hitches

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (5)

There are two key differences between a 2-1/2″ (2.5″) Class V hitch and a 3″ Class V hitch: the size of the opening, and how it’s installed on the vehicle.

Most hitches are bolted to the frame of the vehicle, but 3″ Class V hitches are welded to the C-channel frame.

You’ll usually find 3″ Class V hitches on flatbeds, dump trailers, and other commercial trucks.

3″ Class V hitch weight ratings range from 20,000-25,000 lbs and have a maximum tongue weight of 3,000-4,000 lbs.

What Size Receiver Hitch Do I Have?

To determine what size receiver hitch you have on your vehicle, simply take a measuring tape and measure the inside of the tube to the other inside of the tube.

The measurement should be 1-1/4″ (1.25″), 2″, 2-1/2″ (2.5″), or 3″.

This will tell you what size hitch accessory you’ll need to work with your receiver hitch.

Check out this video showing you exactly how to measure and find out what size receiver hitch you have:

Frequently Asked Questions

Are There Different Size Receiver Hitches?

Yes, there are different size receiver hitches. They are all square openings, ranging 1-1/4″ (1.25″), 2″, 2-1/2″ (2.5″) and 3″.

Each opening is assigned to a different class of hitch, ranging from I to V (1-5). As the hitch class increases, so does the amount of weight and tongue weight they can handle.

What Class Is A 2.5 Inch Receiver Hitch?

A 2.5 inch receiver hitch is a Class V (class 5) hitch, usually used on heavy-duty trucks.

What Size Is A Class 3 Receiver Hitch?

A Class 3 (Class III) receiver hitch is 2 inches, usually used on SUVs, quarter and half-ton trucks, crossovers, and full size sedans.

Tow Hitch Receiver Sizes: What Size Receiver Hitch Do I Need? (2024)
Top Articles
Latest Posts
Article information

Author: Dong Thiel

Last Updated:

Views: 5836

Rating: 4.9 / 5 (79 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dong Thiel

Birthday: 2001-07-14

Address: 2865 Kasha Unions, West Corrinne, AK 05708-1071

Phone: +3512198379449

Job: Design Planner

Hobby: Graffiti, Foreign language learning, Gambling, Metalworking, Rowing, Sculling, Sewing

Introduction: My name is Dong Thiel, I am a brainy, happy, tasty, lively, splendid, talented, cooperative person who loves writing and wants to share my knowledge and understanding with you.